Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

Analyzer shows “Barometer OFF”

The “Barometer OFF” message indicates that the analyzer is not detecting the internal barometric sensor correctly. Follow the steps below to identify the cause.

Possible causes

  • Internal barometric sensor not detected

  • Hardware malfunction

  • Internal electronics issue

What to try

  • Restart the analyzer and check if the “Barometer OFF” message persists.

  • Inspect the device for visible signs of mechanical damage or moisture exposure.

  • Verify that the firmware is up to date (if applicable).

  • If available, access the internal diagnostic values to confirm whether the barometric sensor is detected by the device.

When to contact service

If the “Barometer OFF” message remains displayed after restarting the device and checking for visible damage, the analyzer may require professional inspection.

Please contact an authorized Divesoft Service Point for further diagnostics.

You can find your nearest authorized service location on our Service Centers page.